The ASAP3D SE combines the latest digital power amplifier technology with proven Sonamp® auto House/Local source switching and BBE® Sound Enhancement in a new small package that dramatically expands your installation options. Featuring a highly efficient ICEpower® digital amplifier that provides 25W RMS/ch @ 8 ohms and 50W RMS/ch @ 4 ohms with very little heat generation, the ASAP3D SE is housed in a 1U high by ?-rack wide package. This allows you to mount the amplifier almost anywhere (a key-hole on the bottom panel even lets you hang it on a wall behind a flat screen TV), improves its long-term reliability and provides significant energy savings over conventional amplifier designs. (ICEpower was developed by B&O, a company known for high-quality sound.)
• 25W RMS/ch @ 8 ohms; 50watts RMS/ch @ 4 ohms
• ICEpower® digital amplifier is highly efficient, generating very little heat and keeping the amplifier’s size to a minimum, both of which greatly expand installation options.
• Small size (1U rack height, ?-rack width); amp is small enough to mount on the wall behind a flat-screen TV.
• Automatic House/Localsource switching
• Source switching can be triggered by audio signal, TV power-up, external control voltage or IR signal.
• IR-controllable (input switching, volume, muting, BBE®).
• IR Output connections pass signals from IR controller to emitters for controlling 3rd-party devices.
• IR Bus connection links control signals from multiple ASAP3D SEs to a single set of emitters.
• BBE® Sound Enhancement with +3dB, +6dB and OFF settings.
• Front-panel LEDs indicate operating status and fault conditions.
• Removable quick-connectors and trigger switches simplify installation.
2 (one stereo pair)
Output Power (Stereo)
25 watts RMS per channel, 0.25% THD, 20Hz – 20kHz, @ 8 ohms
50 watts per channel, 0.25% THD, 1kHz, @ 4 ohms
20Hz – 20kHz +1/-3dB (hi-pass filter OFF);
-3dB @ 27Hz (hi-pass filter ON)
Total Harmonic Distortion
0.10% (1kHz, 8 ohms);
0.25% (1kHz, 4 ohms)
Signal to Noise Ration
-94dB (w/22kHz A-WTG filter); -88dB (with AC-sensing trigger)
900mV for 25W RMS output
700mV w/BBE ON (+3dB)
500mV w/BBE ON (+6dB)
Maximum Source Voltage Input
2.3VAC RMS1.3VAC RMS w/BBE ON
250 watts maximum (4 ohms; full power); 17 watts idle (no signal)
28 BTU/HR @ 8 ohms (rock music);
55 BTU/HR @ 4 ohms (rock music)
2A (T2AL ~ 250V)
Dimensions (W x H x D)
9 1/2" x 1 3/4" x 12 1/2" (241mm x 45mm x 318mm)
Rack Space Requirements
1U (1/2 rack width)